Search results for "Homogeneous distribution"
showing 10 items of 13 documents
Optical properties and microstructure of 2.02-3.30 eV ZnCdO nanowires: effect of thermal annealing
2013
International audience; ZnCdO nanowires with up to 45% Cd are demonstrated showing room temperature photoluminescence (PL) down to 2.02 eV and a radiative efficiency similar to that of ZnO nanowires. Analysis of the microstructure in individual nanowires confirms the presence of a single wurtzite phase even at the highest Cd contents, with a homogeneous distribution of Cd both in the longitudinal and transverse directions. Thermal annealing at 550 C yields an overall improvement of the PL, which is blue-shifted as a result of the homogeneous decrease of Cd throughout the nanowire, but the single wurtzite structure is fully maintained.
WS2/MoS2 Heterostructures via Thermal Treatment of MoS2 Layers Electrostatically Functionalized with W3S4 Molecular Clusters
2020
The preparation of 2D stacked layers that combine flakes of different nature, gives rise to countless number of heterostructures where new band alignments, defined at the interfaces, control the electronic properties of the system. Among the large family of 2D/2D heterostructures, the one formed by the combination of the most common semiconducting transition metal dichalcogenides WS2/MoS2, has awaken great interest due to its photovoltaic and photoelectrochemical properties. Solution as well as dry physical methods have been developed to optimize the synthesis of these heterostructures. Here a suspension of negatively charged MoS2 flakes is mixed with a methanolic solution of a cationic W3S…
WS 2 /MoS 2 Heterostructures through Thermal Treatment of MoS 2 Layers Electrostatically Functionalized with W 3 S 4 Molecular Clusters
2020
The preparation of 2D stacked layers combining flakes of different nature gives rise to countless numbers of heterostructures where new band alignments, defined at the interfaces, control the electronic properties of the system. Among the large family of 2D/2D heterostructures, the one formed by the combination of the most common semiconducting transition metal dichalcogenides, WS2 /MoS2 , has awakened great interest owing to its photovoltaic and photoelectrochemical properties. Solution as well as dry physical methods have been developed to optimize the synthesis of these heterostructures. Here, a suspension of negatively charged MoS2 flakes is mixed with a methanolic solution of a cationi…
Differential scanning calorimetry investigation of phase transition in $BaZr_{x}Ti_{1-x}O_{3}$
2009
ABSTRACT Lead-free BaZrxTi1-xO3 (x = 0; 0.025; 0.125) ceramics have been obtained by a conventional method. A single-phase perovskite structure of the ceramics was identified by the X-ray diffraction method. EDS analysis, performed for the individual grains of the tested sample, showed a good homogeneous distribution of all elements throughout the grains. The thermal behaviour of BaZrxTi1-xO3 (x = 0; 0.025; 0.125) ceramics was studied using the Differential Scanning Calorimetry (DSC). Measurements showed the influence of Zr addition on the character of phase transition in the BaTiO3 structure. The results were compared with these ones obtained for pure BaTiO3.
Nanoscale chemistry and atomic-scale microstructure of a bulk Ni3Sn material built using selective laser melting of elemental powder blends
2021
Abstract Cubic specimens of the intermetallic Ni3Sn compound were built using selective laser melting of elemental powder blends. A specimen built at a laser power of 200 W and a scanning speed of 0.5 m/s was determined to have a homogeneous distribution of Ni and Sn on a mesoscopic scale in spite of a 2 at.% Sn deficiency. Characterization of the microstructure using the HAADF-STEM technique reveals a dispersion of ultrafine Ni particles, nanoscale chemical inhomogeneity and the formation of antiphase nanodomains in the matrix of equiaxed Ni3Sn grains. While a mesoscopic homogeneity of the specimen demonstrates a prospect of additive manufacturing of a bulk intermetallic material using sel…
Langmuir monolayers and Langmuir–Blodgett films of ferritin prepared by using a surfactant mixture of eicosylamine (EA) and methyl stearate (SME)
2007
Abstract Magnetic Langmuir–Blodgett films of ferritin have been prepared by using the adsorption properties of a 1/4 mixed monolayer of eicosylamine (EA) and methyl stearate (SME). BAM images show that a more homogeneous distribution of ferritin at the air–water interface is achieved by using this mixture of surfactants instead of the DODA/SME mixed matrix of a previous work. Transfer of the monolayer onto different substrates allowed the preparation of multilayer LB films. Infrared and UV–Vis spectroscopies indicate that ferritin molecules are incorporated within the LB films. Furthermore, UV–Vis spectroscopy measurements reveal that the amount of ferritin incorporated into these LB film h…
Influence of Axial Pressure on the Electrical Properties of Li0.06Na0.94NbO3 Ceramic
2011
Lead-free ceramic Li0.06Na0.94NbO3 was synthesized using a conventional solid-state processing. The single-phase perovskite structure was identified by X-ray powder diffraction technique. The values of lattice parameters of Li0.06Na0.94NbO3 are lower than those for pure NaNbO3. The EDS analysis shows the fairly homogeneous distribution of all elements throughout the grains. An axial pressure significantly influences electric properties. With increasing pressure the peak intensity in the ϵ(T) curve decreases, the peak becomes diffused and shifts to a lower temperature. The value of tanδ increases with increasing axial pressure and its local maximum shifts towards lower temperatures.
Post-sintering heat treatment effect on the coercivity of sintered (Nd,Dy)15(Fe,Co,Mo,Al)77B8 permanent magnets
2000
Abstract The effect of heat treatment on the intrinsic coercivity, iHc and microstructure were investigated for sintered (Nd,Dy)15(Fe,Co,Mo,Al)77 B8 permanent magnet. The microstructure has been investigated by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), X-ray spectroscopy and Mossbauer spectroscopy. The observed behaviour of iHc may be caused by a superposition of the following effects: (i) the distribution of the nonmagnetic phases and the ratio of the amount of hard magnetic Nd2Fe14B-phase to the amount of the residual phases; (ii) homogeneous distribution of elements in the main phases; (iii) removing the stresses in the phases; and (iv) diffusion of Al, …
Targets on superhydrophobic surfaces for laser ablation ion sources
2012
Target preparation techniques for a laser ablation ion source at the Penning-trap mass spectrometer TRIGA-TRAP have been investigated with regard to future experiments with actinides. To be able to perform mass measurements on these nuclides considering their limited availability, an efficient target preparation technique is mandatory. Here, we report on a new approach for target production using backings, which are pretreated in a way that a superhydrophobic surface is formed. This resulted in improved targets with a more homogeneous distribution of the target material compared to standard techniques with unmodified backings. It was demonstrated that the use of these new targets in a laser…
Characterization of single semiconductor nanowires by synchrotron radiation nanoprobe
2012
In this work, we report on the results of the characterization of single semiconductor nanowires by x-ray fluorescence nanoprobe. Wurtzite InGaN and Co-implanted ZnO single nanowires were studied. Ternary semiconductor nanowires show an axial inhomogeneous elemental distribution, with Ga accumulating at the bottom and In at the top of the wires. The ZnO NWs, on the other hand, show a homogeneous distribution of the Co implanted along the nanowires, without signatures of clustering or segregation effects induced by the implantation. No signatures of unintentional doping are observed neither in the InGaN nor the ZnO NWs. These overall results demonstrate the suitability of X-ray fluorescence …